Vehicle Exhaust Lab

Interactive exhaust gas and aftertreatment visualizer

SIMULATION ACTIVE
Scenario
Idle
Exhaust flow
Low
Visible plume
Light
Water vapor / light plume Particulate matter Hot exhaust Cleaner outlet flow

What Comes Out of an Exhaust Pipe?

Vehicle exhaust is a mixture of combustion products, remaining gases, water vapor, and small quantities of pollutants. The exact composition changes with fuel, engine temperature, load, combustion quality, and emission-control systems.

Carbon Dioxide

CO₂

A major combustion product when carbon-based fuel burns. It is generally invisible at the tailpipe.

Water Vapor

H₂O

Water is produced during hydrocarbon combustion. On cold days it can condense and make the exhaust plume easy to see.

Nitrogen Oxides

NOₓ

High combustion temperatures can promote nitrogen-oxide formation. Modern aftertreatment systems work to reduce it.

Carbon Monoxide

CO

Incomplete combustion can produce carbon monoxide. Effective catalysts can convert much of it after warm-up.

Hydrocarbons

HC

Unburned or partially burned fuel components may remain in the exhaust, especially under unfavorable combustion conditions.

Particulate Matter

PM

Very small solid and liquid particles can form during combustion. Filters are designed to capture a large portion of them.

How Exhaust Aftertreatment Works

Modern vehicles use several systems to transform or capture pollutants before gases leave the tailpipe. The exact hardware depends on engine type and vehicle design.
01

Combustion

Fuel and air release energy and create hot exhaust gases.

02

Exhaust Manifold

Gas from the cylinders is collected and directed downstream.

03

Catalyst

Chemical reactions convert selected pollutants into less harmful compounds.

04

Particle Filter

Where fitted, a filter captures particulate matter from the exhaust stream.

05

NOₓ Control

Diesel systems may use additional processes to reduce nitrogen oxides.

06

Tailpipe

Treated exhaust leaves the vehicle and disperses into ambient air.

Driving Conditions Change Exhaust Behavior

The table below summarizes the qualitative patterns used by this simulator. Real vehicles vary significantly by engine, calibration, fuel, temperature, maintenance, and aftertreatment design.
Scenario
Exhaust Flow
Temperature
Typical Visualization
Idle
Low
Low–Medium
Small, steady plume
Cold Start
Low–Medium
Cold system
More visible vapor and untreated emissions
Cruise
Medium
Stable
Consistent, cleaner flow
Acceleration
High
Rising
Dense, fast-moving exhaust stream
Hill Climb
High
High
Sustained hot exhaust
DPF Regeneration
Medium
Very high
Hot flow during filter cleaning process

Vehicle Exhaust Concept Map

A simplified path from fuel combustion to atmospheric dispersion.
A

Fuel + Air

The engine takes in fuel and oxygen-containing air.

B

Combustion

Chemical energy becomes heat and mechanical work.

C

Raw Exhaust

Combustion products and pollutants leave the cylinders.

D

Aftertreatment

Catalysts and filters reduce selected pollutants.

E

Tailpipe

Treated gases leave the vehicle.

F

Dispersion

Wind and turbulence dilute and transport the exhaust plume.